Directory results

 
Result 1 of 6 results
  • 1,500+ Business Documents - Welding
    Welding If welding equipment is used incorrectly, then this could lead to incidents involving fire, resulting in burns and other serious personal injuries.Managing the risksTo help you to identify the hazards associated with using welding equipment and the appropriate ways of controlling them, use our example Risk Assessment - Welding. It covers the generic hazards associated with this type of activity and suggests control measures to reduce risks to an acceptable level. You should ensure that your document...
    Click here
  • 1,500+ Business Documents - Changing electric light fittings
    Changing electric light fittings Changing an electric light fitting must be done with care. There are several possible risks involved, including cuts from broken glass, burns from incorrect handling, plus the associated dangers of working at height and the possibility of finding asbestos.Assess the risksIf these risks are left unmanaged, they could cause accidents and potentially put you on the wrong side of the law.  To ensure that this doesn't happen, you should complete a risk assessment for your specific...
    Click here
  • 1,500+ Business Documents - Changing electric socket outlets
    Changing electric socket outletsChanging an electric socket outlet needn't be dangerous; in fact, if managed properly, the residual risks are minimal. However, failure to ensure that risks are reduced to an acceptable level may result in an accident, and even loss of life. Managing the risks To help you identify the hazards associated with changing sockets and some appropriate ways of controlling them, use our example Risk assessment - Changing Electric Socket Outlets. It covers the generic hazards associated...
    Click here
  • 1,500+ Business Documents - Permit to work - non-energised circuits
    Permit to work - non-energised circuitsWhen working on an electrical system that should be isolated you need to prevent it from being switched back on. You can do this by following a permit-to-work system.How to use the formOur permit to work is split info four parts:Part A. The first section asks for specific information about the job. This includes the date and time of the job, the exact location of the work, details of any plant/equipment that may be used and the nature of the work/tests that will be completed. Part...
    Click here
  • 1,500+ Business Documents - Electrical safety policy
    Electrical safety policyElectricity can be taken for granted, so it's easy to forget the number of accidents and fires it causes. Why not use our policy to help in managing these risks?Using the templateWe've written our Electrical Safety Policy so that it applies to the majority of businesses. Most will only need to make a few minor tweaks at the places we've highlighted in italics. Note. If you have an electrical business or your company is involved in high voltage or other specialist work, you'll need to...
    Click here
  • 1,500+ Business Documents - Permit to work - energised circuits
    Permit to work - energised circuitsWork completed on electrical installations should be controlled with the use a permit-to-work system. This is of great importance when the work in question is on a live system. Manage the risksOur permit to work sets out the control measures that should be applied when working on electrical systems. This particular document covers work on energised systems.  To ensure that the work is carried out safely, the competent person should make sure that a safe system of work has...
    Click here
 
Result 1 of 6 results